eCommons

 

Bright Infrared Quantum-dot Light-emitting Diodes Through Inter-dot Spacing Control

Other Titles

Abstract

Infrared light-emitting diodes are currently fabricated from direct-gap semiconductors using epitaxy, which makes them expensive and difficult to integrate with other materials. Light-emitting diodes based on colloidal semiconductor quantum dots, on the other hand, can be solution-processed at low cost, and can be directly integrated with silicon. However, so far, exciton dissociation and recombination have not been well controlled in these devices, and this has limited their performance. Here, by tuning the distance between adjacent PbS quantum dots, we fabricate thin-film quantum-dot light-emitting diodes that operate at infrared wavelengths with radiances (6.4 W sr(-1) m(-2)) eight times higher and external quantum efficiencies (2.0%) two times higher than the highest values previously reported. The distance between adjacent dots is tuned over a range of 1.3 nm by varying the lengths of the linker molecules from three to eight CH(2) groups, which allows us to achieve the optimum balance between charge injection and radiative exciton recombination. The electroluminescent powers of the best devices are comparable to those produced by commercial InGaAsP light-emitting diodes. By varying the size of the quantum dots, we can tune the emission wavelengths between 800 and 1,850 nm.

Journal / Series

Volume & Issue

Description

Sponsorship

This material is based on work supported by the National Science Foundation (NSF, grant no. EEC-0646547) and by the New York State Foundation for Science, Technology and Innovation (NYSTAR). J.J.C. and D.S. acknowledge support from the Cornell Center for Materials Research with funding from IGERT: a Graduate Traineeship in Nanoscale Control of Surfaces and Interfaces (DGE-0654193) of the NSF. This publication is based on work supported in part by an award (no. KUS-C1-018-02) made by King Abdullah University of Science and Technology (KAUST). GISAXS measurements were conducted at Cornell High Energy Synchrotron Source (CHESS) and the authors thank D.-M. Smilgies for calibration of the beam line set-up.

Date Issued

2012-05-06

Publisher

Nature Nanotechnology

Keywords

Light emitting; Diodes; Colloidal; semi-conductor; quantum dots

Location

Effective Date

Expiration Date

Sector

Employer

Union

Union Local

NAICS

Number of Workers

Committee Chair

Committee Co-Chair

Committee Member

Degree Discipline

Degree Name

Degree Level

Related Version

Related DOI

Related To

Related Part

Based on Related Item

Has Other Format(s)

Part of Related Item

Related To

Related Publication(s)

Link(s) to Related Publication(s)

References

Link(s) to Reference(s)

Previously Published As

Nature Nanotechnolgy, Vol 7, May 6, 2012, 369-373

Government Document

ISBN

ISMN

ISSN

Other Identifiers

Rights

Rights URI

Types

article

Accessibility Feature

Accessibility Hazard

Accessibility Summary

Link(s) to Catalog Record